膜通量是由外加推动力和膜的阻力来共同决定的，其中膜本身的性质就起了决定

膜通量是由外加推动力和膜的阻力来共同决定的，其中膜本身的性质就起了决定性作用。膜通量不高，原因有很多，温度影响了膜本身的阻力，温度升高导致分子长链重排，使得膜面更致密，从而导致温度越高，平板膜的纯水通量越小。膜厚度不同，影响膜结构的形成，导致孔径、孔隙率不同。不同后处理工艺，影响膜孔的保湿效果以及性能的稳定性。铸膜液配方也关乎膜本身的通量。

結果 (英文) 1:

Flux is composed of external impetus and membrane resistance to common decisions, the nature of the film itself plays a decisive role. The flux is not high, there are many reasons why temperature affects the resistance of the membrane itself, temperatures lead to rearrangement of the long chain of molecules, making the surface more dense, thus leading to higher temperatures, smaller flat membrane water fluxes. Film thickness, influence the formation of membrane structure, resulting in different pore size and porosity. After different treatment, moisturizing effect of the membrane hole stability and performance. Casting solution composition of flux about the film itself.

結果 (英文) 2:

Membrane flux is applied by the driver and the membrane resistance to joint decision, in which the nature of the film itself will play a decisive role. Flux is not high for many reasons, the temperature resistance of the film itself, the temperature rise resulting in a long chain molecular rearrangement, so that the membrane surface is more compact, resulting in higher temperatures, smaller flat membrane pure water flux. Different thickness, affect the formation of the membrane structure, resulting in different pore diameter, porosity. Stability and performance moisturizing effect of different post-treatment processes, membrane pores. Casting solution formulation is also about the film itself flux.

結果 (英文) 3:

Membrane flux is determined by the external force and the resistance of the film, and the properties of the film itself play a decisive role. Membrane flux is not high, because there are a lot of reasons, the temperature affects the resistance of the film itself, temperature increases lead to molecular long chain rearrangement, making the membrane surface more dense, resulting in higher temperature, the smaller the water flux of the flat membrane. Different film thickness affects the formation of membrane structure, which leads to different pore size and porosity. Different post treatment process, the effect of membrane pore moisture and the stability of the performance. Casting membrane solution is also related to the flux of the membrane itself.