修邊作業時，檢查是否熔射燃燒不完全之過大鋁粒，如鋁粒量少時，以美工刀片

修邊作業時，檢查是否熔射燃燒不完全之過大鋁粒，如鋁粒量少時，以美工刀片將其挑除，如鋁粒量過大時，則向組長反映。

結果 (英文) 1:

When the trimming operation, check whether the incomplete combustion of spraying aluminum particles is too large, such as when a small amount of aluminum particles, in order to insert it rejects art, such as when aluminum particles is too large, the reflected head.

結果 (英文) 2:

When repairing edge work, check whether the melting combustion is not completely too large aluminum grain, such as small amount of aluminum grain, to the art blade to remove it, such as aluminum grain size is too large, then reflect to the group leader.

結果 (英文) 3:

During trimming operation, check whether there are too large aluminum particles with incomplete fusing and burning. If the amount of aluminum particles is small, remove them with art blade. If the amount of aluminum particles is too large, report to the team leader.