Hello!
The chemical composition of peat:
1. The peat plates are pressed ready for pickup on any of the prepared surface with the creation of lawns, flower beds in squares, parks, houses, near railway tracks, roads and planting them herbs, flowers, decorative landing of plants.
Characteristics of the plate:
The peat plates are made from extruded raised milled peat, dried up to the humidity 22-28% and pressed in the form of a rectangle.
Characteristics of raw material:
Peat, peat - moss
The degree of decomposition H1-H2 Ash 2%
Acidity (water extract) to neutralize 3.5 - 4.0
Agrochemical and physical characteristics of products:
Humidity - 22 - 28% of the water Capacity - 400%
The content of nutrients (mg/100 g dry substance):
Nitrogen (N) is not less than 200 mg
Phosphorus (P2O5) - not less than 300 mg
Potassium (K2O) - not less than 300 mg
Acidity (pH) of water extract - 5,5-6,0.
Microelements: Cu, B, Mn, Mo, Zn, Fe
Conductivity - 0.5-1.1 ms/cm
The size of one plate: HH mm, thickness can vary from 25 to 35 mm;
Weight of one plate: 1200-1500 gr, changes depending on the humidity.
2. Plate peat pressed -18 L. intended for growing plants, vegetables, flowers, ornamental crops in greenhouses that use low-capacity techniques.
Characteristics of the plate:
The peat plates are made from extruded raised milled peat, dried up to the humidity 22-28% and pressed in the form of a rectangle the size of one block HH mm
Characteristics of raw material:
Peat, peat - moss
The degree of decomposition H1-H2 Ash 2%
Acidity (water extract) to neutralize 3.5 - 4.0
Agrochemical and physical characteristics of products:
Humidity - 22-28% Moisture capacity - 400%
Acidity (pH) of water extract - 5.5-6.0
Elektroprovodnosti - 0.1-0.5 ms/cm
3. Beket peat extruded (Tablet) is intended for growing seedlings of various vegetable, flower, decorative cultures at home, on private land, in the open and protected ground.
Characteristics of a briquette:
Peat briquettes pressed (Tablet) are produced from raised milled peat, dried up to the humidity of 22-25% and pressed round briquettes for the pot with a capacity of 0.6; 0.8; 1.0 liter.
Characteristics of raw material:
Peat, peat - moss
The degree of decomposition H1-H2 Ash 2%
Acidity (water extract) to neutralize 3.5-4.0
Agrochemical and physical characteristics of products:
Humidity is 22-25% Acidity (pH) of water extract - 5.5-6.0
The content of nutrients (mg/100 gr. dry substance)
Nitrogen (ammonium and nitrate) - 100-120;
Phosphorus (P2O5) - 150-200;
Potassium (K2O) - 150-200.
Conductivity - 0.5-1.1 ms/cm
Microelements: Cu, B, Mn, Mo, Zn, Fe
The sizes of a briquette:
0.6 HP - diameter 80 mm, height of 25-35 mm, weight 60-80 g;
0.8 HP - diameter 85 mm, height of 25-35 mm, weight 70-90 g;
1 L. a - 95mm diameter, height 25-35 mm, weight 100-130 g.
Weight briquette varies depending on humidity and size fractions of peat.
Hello!The chemical composition of peat:1. The peat plates are pressed ready for pickup on any of the prepared surface with the creation of lawns, flower beds in squares, parks, houses, near railway tracks, roads and planting them herbs, flowers, decorative landing of plants.Characteristics of the plate:The peat plates are made from extruded raised milled peat, dried up to the humidity 22-28% and pressed in the form of a rectangle.Characteristics of raw material:Peat, peat - mossThe degree of decomposition H1-H2 Ash 2%Acidity (water extract) to neutralize 3.5 - 4.0Agrochemical and physical characteristics of products:Humidity - 22 - 28% of the water Capacity - 400%The content of nutrients (mg/100 g dry substance):Nitrogen (N) is not less than 200 mgPhosphorus (P2O5) - not less than 300 mgPotassium (K2O) - not less than 300 mg Acidity (pH) of water extract - 5,5-6,0.Microelements: Cu, B, Mn, Mo, Zn, FeConductivity - 0.5-1.1 ms/cmThe size of one plate: HH mm, thickness can vary from 25 to 35 mm;Weight of one plate: 1200-1500 gr, changes depending on the humidity.2. Plate peat pressed -18 L. intended for growing plants, vegetables, flowers, ornamental crops in greenhouses that use low-capacity techniques.Characteristics of the plate:The peat plates are made from extruded raised milled peat, dried up to the humidity 22-28% and pressed in the form of a rectangle the size of one block HH mmCharacteristics of raw material:Peat, peat - mossThe degree of decomposition H1-H2 Ash 2%Acidity (water extract) to neutralize 3.5 - 4.0Agrochemical and physical characteristics of products:Humidity - 22-28% Moisture capacity - 400%Acidity (pH) of water extract - 5.5-6.0Elektroprovodnosti - 0.1-0.5 ms/cm3. Beket peat extruded (Tablet) is intended for growing seedlings of various vegetable, flower, decorative cultures at home, on private land, in the open and protected ground.Characteristics of a briquette:Peat briquettes pressed (Tablet) are produced from raised milled peat, dried up to the humidity of 22-25% and pressed round briquettes for the pot with a capacity of 0.6; 0.8; 1.0 liter.Characteristics of raw material:Peat, peat - mossThe degree of decomposition H1-H2 Ash 2%Acidity (water extract) to neutralize 3.5-4.0Agrochemical and physical characteristics of products:Humidity is 22-25% Acidity (pH) of water extract - 5.5-6.0The content of nutrients (mg/100 gr. dry substance)Nitrogen (ammonium and nitrate) - 100-120;Phosphorus (P2O5) - 150-200;Potassium (K2O) - 150-200.Conductivity - 0.5-1.1 ms/cmMicroelements: Cu, B, Mn, Mo, Zn, FeThe sizes of a briquette:0.6 HP - diameter 80 mm, height of 25-35 mm, weight 60-80 g;0.8 HP - diameter 85 mm, height of 25-35 mm, weight 70-90 g; 1 L. a - 95mm diameter, height 25-35 mm, weight 100-130 g.Weight briquette varies depending on humidity and size fractions of peat.
正在翻譯中..
