限值是根据产品最终使用的目的来决定的。比如客户想达到袋子装15kg 物

限值是根据产品最终使用的目的来决定的。比如客户想达到袋子装15kg 物品不会坏的要求，ISO 13934-2的限值需满足≥150N。其他承重上限亦可，由客户决定。ISO 13938-2 的限值，建议的限值200kPa通过测试仪器爆破的面积换算成力值也是接近150N， 即袋子装了15kg物品后，局部受到的挤压情况。

結果 (英文) 1:

Limit is based on the purpose of the final product used to decide. For example, customers want to achieve in bags of 15kg articles are not bad requirements, ISO 13934-2 limits to be met ≥150N. Other load-bearing upper limit may be determined by the customer.
After ISO 13938-2 limits, limits recommended by the tester 200kPa blasting area is converted into force values close 150N, i.e., in bags of 15kg article by locally pressing case.

結果 (英文) 2:

Limits are determined according to the purpose for which the product is ultimately used. For example, the customer wants to meet the requirement that the bag 15kg items will not be bad, ISO 13934-2 limit needs to meet the limit of 150N. Other load-bearing caps are also available and are determined by the customer.
ISO 13938-2 limit, the recommended limit of 200kPa through the test instrument blasting area conversion force value is also close to 150N, i.e. the bag loaded with 15kg items, the local squeeze situation.

結果 (英文) 3:

The limit value is determined according to the final use purpose of the product. For example, if the customer wants to meet the requirement that 15kg goods in bags will not be damaged, the limit value of ISO 13934-2 should be ≥ 150n. Other upper limit of bearing capacity can also be determined by the customer.
The limit value of ISO 13938-2, the recommended limit value of 200KPa, is also close to 150n when converted into the force value by the blasting area of the test instrument, that is, the local extrusion situation when the bag is filled with 15kg goods.