發現網版破損現象時，應將印刷不良之基板做標示管理，並於印刷製程出站前，

發現網版破損現象時，應將印刷不良之基板做標示管理，並於印刷製程出站前，對不良元件進行保護層破壞，使外觀機檢查時能有效判定不良予以排除。

結果 (英文) 1:

Failure determination can be effectively excluded when breakage discovery screen, the substrate should be of poor print management for labeling, and printing process before the station, the protective layer of the defective element damage and the appearance inspection machine.

結果 (英文) 2:

When the phenomenon of mesh breakage is found, the substrate of bad printing should be marked and managed, and before the printing process exit, the bad components are damaged by protective layer, so that the appearance machine inspection can effectively determine the bad to be ruled out.

結果 (英文) 3:

In case of any damage to the screen plate, the base plate with poor printing shall be marked and managed, and before the printing process is out of the station, the defective components shall be damaged in the protective layer, so that the defective components can be effectively determined and eliminated during the appearance machine inspection.