UPS已經在1/11安裝完成我已經在1/11完成台中校區11台UPS的

UPS已經在1/11安裝完成我已經在1/11完成台中校區11台UPS的安裝及設定!以下為目前狀況:1.switch-Grade 2 :電壓穩定,一切正常2.switch-Library :電壓穩定,一切正常;建議加裝一個風扇,增加空氣對流及散熱!3.switch-Gym-1F :電壓不穩定(輸入約127伏特),UPS持續進行穩壓輸出!目前網路及監視設備均放置在販賣部的天花板夾層上,此處溫度高散熱很差!如果可能建議更改位置!4.switch-EMS Lab(Grade 8) :電壓穩定,一切正常5.switch-H203 :電壓不穩定(輸入約127伏特),UPS持續進行穩壓輸出!6.switch-H207 :電壓不穩定(輸入約127伏特),UPS持續進行穩壓輸出!7.switch-Auditorium :電壓不穩定(輸入約120~127伏特),UPS持續進行穩壓輸出!8.switch-Art :電壓不穩定(輸入約126伏特),UPS持續進行穩壓輸出!在安裝的時候,原本的switch發生死機的狀況!已經先更換一個switch恢復網路了!9.switch-ScienceOffice New :電壓不穩定(輸入約127伏特),UPS持續進行穩壓輸出!10.switch-Front :電壓穩定,一切正常11.switch-Cafeteria :電壓穩定,一切正常經過與Amy討論,因為HS,科學館,Gym,ART這些校舍是使用舊的變電站,設備老舊,所以電力供應不穩定(過高)!而EMS校舍是較新的,使用新型的變電站設備,所以電力供應穩定!這結果也讓我們知道了,為何高中部的電子設備比較容易故障及損壞!而目前switch加裝UPS之後,透過UPS的穩壓功能,可以提高網路設備的使用壽命了!!

結果 (英文) 1:

UPS has been installed in the completion of 1/11

I have completed Taichung Campus, 11 UPS installation and set at 1/11!
Here is the current situation:
1.switch-Grade 2: voltage stability, everything is normal
2.switch-Library: Voltage stable, everything is normal; recommended to install a fan, increases air convection and heat dissipation!
3.switch-Gym-1F: voltage instability (input of about 127 volts), the regulated output current continues the UPS and the network monitoring apparatus are placed! on the mezzanine ceiling trafficking unit, where high temperature heat dissipation is poor, if possible recommendations to change the location!!
4.switch-EMS Lab (Grade 8): voltage stability, everything is normal
5.switch-H203: voltage instability (input about 127 volts), UPS continued regulated output!
6.Switch-H207: voltage instability (input of about 127 volts), UPS continued regulated output!
7.switch-Auditorium: voltage instability (about 120 to 127 volts input ), UPS continued to be regulated output!
8.switch-Art:!! unstable voltage (about 126 volts input), UPS continued to be regulated output at the time of installation, the original switch status crash occurred has to replace a switch restore the network!
9.switch-ScienceOffice New: voltage instability (about 127 input Volts), UPS continued to be regulated output!
10.switch-Front: voltage stability, everything is normal
11.switch-Cafeteria: voltage stability, everything is normal

after discussion with Amy, because HS, Science Center, Gym, ART is to use these buildings the old substation, aging facilities, the power supply is unstable (too)!
The EMS is a relatively new school buildings, the use of new substation equipment, the power supply stable!
This result also let us know why electronic devices of high school more easily malfunction and damage!
And the current switch after the installation of UPS, through the UPS regulation function, can improve the life of the network equipment !!

結果 (英文) 2:

UPS is already installed in 1/11

I have completed the installation and setting of 11 UPS units in Taichung Campus in 1/11!
Here's the current situation:
1.switch-Grade 2: voltage stable, everything is OK
2.switch-Library: voltage is stable, everything is fine, it is recommended to add a fan to increase air convection and heat dissipation!
3.switch-Gym-1F: voltage instability (input about 127 volts), UPS continues to stabilize the output! Currently the network and monitoring equipment are placed on the ceiling mezzanine of the trafficking department, where the temperature is very poor heat dissipation! If it may be recommended to change the position!
4.switch-EMS Lab (Grade 8): Voltage stable, everything is OK
5.switch-H203: Voltage instability (input approx. 127 volts), UPS continuously regulator output!
6.switch-H207: Voltage instability (input approx. 127 volts), UPS continuously regulator output!
7.switch-Auditorium: voltage instability (input s120 to 127 volts), UPS continuously regulator output!
8.switch-Art: voltage instability (input about 126 volts), UPS continues to stabilize the output! At the time of installation, the original switch crash situation!
9.switch-Science Office New: Voltage instability (input approx. 127 volts), UPS continuously regulator output!
10.switch-Front: voltage stable, everything is fine
11.switch-Cafeteria: voltage stable, everything is ok

After discussions with Amy, because HS, Science Museum, Gym, ART these buildings are using old substations, old equipment, so the power supply is unstable (too high)!
And EMS school building is relatively new, the use of new substation equipment, so the power supply is stable!
This result also lets us know why high-center electronic equipment is more prone to failure and damage!
And the current switch added UPS, through the UPS regulator function, can improve the service life of network equipment! !

結果 (英文) 3:

UPS has been installed on 1 / 11
I have completed the installation and setting of 11 UPS in Taichung campus on 1 / 11!
The current situation is as follows:
1. Switch grade 2: voltage is stable and everything is normal
2. Switch Library: the voltage is stable and everything is normal; it is recommended to install a fan to increase air convection and heat dissipation!
3. Switch-gym-1f: the voltage is unstable (input is about 127 volts), and the ups keeps constant voltage output! At present, the network and monitoring equipment are placed on the ceiling mezzanine of the sales department, where the temperature is high and the heat dissipation is poor! If possible, it is suggested to change the location!
4. Switch EMS Lab (Grade 8): voltage is stable and everything is normal
5. Switch-h203: the voltage is not stable (input is about 127 volts), and the ups keeps constant voltage output!
6. Switch-h207: the voltage is not stable (input is about 127 volts), and the ups keeps constant voltage output!
7. Switch auditorium: the voltage is unstable (input is about 120 ~ 127 volts), and the ups keeps constant voltage output!
8. Switch Art: the voltage is unstable (the input is about 126 volts), and the ups continues to stabilize the output! During the installation, the original switch crashed! A switch has been replaced to restore the network first!
9. Switch scienceoffice new: the voltage is unstable (input is about 127 volts), and the ups continues to stabilize the output!
10. Switch front: voltage is stable, everything is normal
11. Switch cafeteria: voltage is stable, everything is normal
After discussion with Amy, because HS, science museum, gym and art are old substations and old equipment, the power supply is unstable (too high)!
EMS campus is relatively new, using new substation equipment, so the power supply is stable!
This result also let us know why the electronic equipment of high school is easy to break down and damage!
At present, after the switch is equipped with UPS, the service life of network equipment can be improved through ups voltage stabilizing function!!