橫向位移的計算方法是平均光束南北端測得的位移。本文將南向載荷表示為正數

橫向位移的計算方法是平均光束南北端測得的位移。本文將南向載荷表示為正數。在測試開始時，通過預應力增強對每列施加 300 kn 的軸向載荷，以類比長期載荷。測試開始後，沒有嘗試保持此軸向負載恒定。

結果 (英文) 1:

The method of calculating the average lateral displacement of the beam measured displacement south and north ends. This paper will represent the South as a positive number to load. At test initiation, by applying a prestress reinforcement 300 kn axial loads for each column, by analogy long loads. After the start of the test, there is no attempt to maintain this constant axial load.

結果 (英文) 2:

The calculation method of horizontal displacement is the displacement measured at the north and south ends of the average beam. This article represents the southbound load as a positive number. At the beginning of the test, an axial load of 300 kn is applied to each column with pre-stress enhancement to simulate long-term loads. No attempt was made to keep this axial load constant after the test began.

結果 (英文) 3:

The calculation method of the transverse displacement is the displacement measured at the north and south ends of the average beam. In this paper, the South load is expressed as a positive number. At the beginning of the test, an axial load of 300 kn is applied to each column by prestressing reinforcement to simulate the long-term load. After the start of the test, no attempt was made to keep this axial load constant.