Fill the assembled and masked unit

Fill the assembled and masked unit with specified potting compound (pos. 4).
Approximate level of potting compound shown in view above.
Make sure a complete filling of the whole cavity is achieved.
The cable should be vertical with the potting surface, and the distance between the wires should be less than 12mm.
Note! Units with spilling of potting compound on connectors and outside the Box will be rejected

結果 (中文) 1:

用指定灌封料 （货单 4） 填充的组装和戴着面具的单位。近似水平的灌封复合显示在视图中以上。确保实现整个腔完全填充。电缆应垂直与灌封的表面，和导线之间的距离应小于 12 毫米。请注意 ！溢出的灌封料在连接器上和外箱的单位将被拒绝

結果 (中文) 3:

填写组装和蒙面单位指定的灌封化合物（位置4）。灌封化合物针对上面的近似水平。确保完成整个腔的完全填充。电缆应垂直与封装表面和导线之间的距离应小于12mm。注！溢出的灌封化合物对连接器和外箱将被拒绝的单位