在草圖如圖10所示，對於不同的極限狀態和在面破壞模式四種可能的位移曲線

在草圖如圖10所示，對於不同的極限狀態和在面破壞模式四種可能的位移曲線被示出。另外，按照以下計算步驟來定義。

結果 (英文) 1:

As illustrated in the sketch, and limit state for different surfaces in four possible failure mode displacement curve 10 is shown. Further, according to the following calculation step is defined.

結果 (英文) 2:

As shown in the sketch figure 10, four possible displacement curves are shown for different limit states and in face destruction mode. Also, follow the following calculation steps to define.

結果 (英文) 3:

In the sketch as shown in Figure 10, four possible displacement curves for different limit states and in-plane failure modes are shown. In addition, follow the calculation steps below to define.